Pictured: Last year's two Micro class aircraft, along with the lone surviving Regular class aircraft shadow early prototypes of this year's Micro class aircraft.
SAE Aero Design is a collegiate competition hosted by SAE International in which student teams design, build, and fly radio-controlled aircraft to meet a demanding set of mission requirements. NAU has competed several times over the years, and this year's Mechanical Engineering capstone team, the AeroJacks, is building the BlueBird for the Micro class at SAE Aero West in Van Nuys, CA. The BlueBird is an ambitious blended wing body design under 60 inches that must carry an internal payload and drag articles, take off within 50 feet, complete a 360-degree circuit, and land within 200 feet. Learn more on the team's capstone page.
Forward and aft spar joinery, FDM 3D printed in pairs and shown on the print bed before support removal.
Left and right wingtips, FDM 3D printed in pairs and shown on the print bed before support/ raft removal.
As a junior manufacturing aid on the Micro class team, I dissected and analyzed wing wreckage from prior competition failures to inform future structural design decisions, and built an Excel material selection sheet from technical data sheets to rank candidate materials by their mechanical and physical properties. I also tested and verified the functionality of servos, motors, and receivers salvaged from crash wreckage so they could be reused or repurposed. On the fabrication side, I FDM 3D printed a prototype magnetic wing hardpoint for external payloads, along with 26+ components such as spars, winglets, ribs, and joinery.